In recent years, more and more paint processing equipment around us has become more and more, which has brought great convenience to our processing work. The types of spray paint equipment around us are becoming more and more, which also adds a lot of matters to our use. We want to use these spray paint rooms and improve the quality of spray paint processing. Understand the use of these spray paint room, today to tell you about the use of paint room for processing, it needs to know what to use, I hope you can understand.
 
As an important equipment in the coating industry, the function of spray paint room should not be underestimated. Therefore, it is necessary to use it correctly in daily work, otherwise it will cause unnecessary trouble. The lacquer room equipment needs to open the lifting door completely before starting, and close the hoist door after the fan is fully started. Before opening and closing the hoist, there shall be no items and obstacles on the two sides of the door and the upper and lower sides of the door. When the spray painting room is used, the fan and the pump should be opened first and the exhaust fan can be reopened. The spraying operation can be carried out. When the spraying operation is finished, the paint room and the flat room should be turned for a period of time to discharge the residual waste gas. The exhaust blower and water pump should be shut off before closing the blower, so that the air from the untreated workshop will enter the door and pollute the spray booth. It is forbidden to spray work under the condition of open fire around the paint room. Regularly clean and adjust the water rotary cylinder and adjusting ring to ensure the normal working state of each cyclone. The paint spray chamber is operated under the condition of micro positive pressure, and positive pressure can be realized by adjusting the frequency conversion of the fan.